TANDBERG 880 User Manual page 99

Appendix 5: Access Code
The system will verify if the entered access code is valid by checking the code with the allowed codes listed in the
'access.txt' file on the ftp-server in the codec.
If no 'access.txt' file is uploaded to the codec, registration of the code will be done without validation. E.g. you can enter
whatever code you want and have access to the system.
The 'access.txt' file is a plain text file with one line per access code as shown below:
1234
1250
A1
B2
ABC
To upload this file to the codec, follow these steps:
· Open a DOS-window and go to the folder where the 'access.txt' file is located.
· Type ftp <IP-address of your local codec).
· 'User:', press Enter or enter IP-password.
· Type "bin" and press Enter
· Go to the user folder, type "cd user".
· Upload the 'access.txt' file, type 'put access.txt'.
· Exit from ftp, type 'bye'.
TANDBERG Videoconferencing System
99
Appendices