2-Preparation; Inserting An Sd Card - Tascam DR-1 Quick Start Manual

2–Preparation

Inserting an SD card

Since this unit uses an SD card for recording and
playback, you must insert an SD card before use.
The SD card slot and the USB connector are under
the cover on the left side panel.
Press the cover down in the direction of the arrow
to open it. Insert the included SD card in the SD
card slot and push it until it clicks fully into place.
Removing the SD card
Press the inserted SD card in gently and it will
disengage from the unit so that you can pull it out
completely.
CAUTION
Do not remove the SD card during recording or
playback, or when the unit is connected to the
computer by USB.