Tascam DR-1 Quick Start Manual page 24

5–Overdubbing
5 Press the
REC/PAUSE
record standby. The key flashes red and an
pop-up appears on the screen.
OVERDUB
6 Use the wheel to turn the "
(highlighted in inverse).
ON
key to put the unit in
" item
OVERDUB
7 Press the
REC/PAUSE
the file selected in step 1 and recording of a
new file starts simultaneously, so you can start
singing or playing along with the prerecorded
music immediately.
8 Press the
STOP/HOME
NOTE
• The mixed signal is recorded as a new file. The
original playback file is not erased.
• By recording repeatedly in OVERDUB mode, you can
use the unit to overdub multiple parts.
• If you reduced the playback sound balance in step 3
above before overdubbing, when you play back the
newly created audio file, its volume will be rela-
tively quiet compared to when monitoring during
recording. In this case, use the MIX BALANCE + key
to maximize the playback level.
key again. Playback of
key to stop recording.