Creating New Files Automatically At A Set Time Interval; Recording Two Files Simultaneously (Dual Rec Function); Recording At Two Different Levels (Dual Level Recording); Recording With Two Different Formats (Dual Format Recording) - Tascam DR-100MKIII Reference Manual

Creating new files automatically at a set time
interval
Recording of the current file can be stopped and a new file
can be created automatically when the time set with the REC
SETTING screen FILE INC item is exceeded.
Follow the procedures below to set the time that new files are
automatically created during recording.
1. Select the REC SETTING screen FILE INC item to open the
FILE INC screen. (See "Basic menu operation procedures" on
page 10.)
2. Set the time that new files are automatically created.
Options: OFF (default), 5 min, 10 min, 15 min, 30 min
Recording two files simultaneously
(DUAL REC function)
Recording at two different levels (dual level
recording)
Recording with the level set as high as possible is important for
achieving high audio quality, but distortion will occur if the level
is too high.
Dual level recording allows a second recording to be recorded
simultaneously at a level 12dB lower than the set recording
level, resolving this concern.
This allows you to set the recording level high and make a
backup recording at a lower level in case distortion occurs.
This function can be used not only with the built-in mics but
also with connected external mics.
NOTE
• Dual level recording cannot used if the sampling frequency
is 176.4 or 192 kHz.
• This function is disabled if the input source is set to DIGITAL.
• The dual ADC function cannot be used at the same time.
• If the limiter is on, it will not affect the backup recording.
1. Select the REC SETTING screen DUAL REC item to open the
DUAL REC screen. (See "Basic menu operation procedures" on
page 10.)
2. Set the dual recording mode to LEVEL.
3. Press the REC [ ] button to enter recording standby.
0
On the Home Screen, LEVEL will appear next to DUAL in the
recording function information area.
4. Press the REC [
] button again to start dual recording.
0
Recording with two different formats (dual
format recording)
This unit can simultaneously record the same recording in two
different formats (WAV and MP3), creating two separate files.
NOTE
• When using dual format recording, set the FORMAT item to
WAV16.
• Dual format recording cannot used if the sampling
frequency is 88.2, 96, 176.4 or 192 kHz.
• The dual ADC function cannot be used at the same time.
• If the limiter is on, it will affect both files.
1. Select the REC SETTING screen DUAL REC item to open the
DUAL REC screen. (See "Basic menu operation procedures" on
page 10.)
2. Set the dual recording mode to FORMAT.
4 – Recording
27
TASCAM DR-100MKIII