8-Loop Playback And Effects; Using Loop Playback; Using Effects - Tascam DR-1 Quick Start Manual

Using loop playback

You can choose part of a track for the DR-1 to play
repeatedly.
1 Press the key to start playback.
¥/π
2 Press the key at the point where you want
I/O
the loop playback interval to start.
3 Press the key again at the point where you
I/O
want the loop playback interval to end. Loop
playback starts automatically.
To stop loop playback, press the LOOP key or
the I/O key.
If you press the
LOOP
•
setting is saved, and you can press the
key again to start loop playback again.
If you press the
I/O
•
setting is erased.
8–Loop Playback and Effects
key, the loop interval
LOOP
key, the loop interval

Using effects

This unit has built-in effects. These effects can be
used on all the inputs—the built-in microphone,
both microphone inputs and the
The effects in this unit have various presets. When
using an effect preset, you can control its output
level and one other important parameter.
Briefly press the key to turn the effect ON
FX
and OFF.
When the effects are ON, the
lighted in inverse at the bottom right of the display.
NOTE
Press and hold the FX key to open the EFFECT screen
where you can select the preset effect and change
its parameters. See the "Using built-in effects"
chapter in the Owner's Manual.
input.
LINE IN
icon is high-