Aastra 9143i Series Release Notes page 32

New features in release 2.6
Configuring "Call Hold Reminder Frequency" Using the Configuration Files
Use the following parameter to configure this feature using the configuration file
Parameter –
call hold reminder frequency
Description
Format
Default Value
Range
Example
32
Configuration Files aastra.cfg, <mac>.cfg
Specifies the time interval, in seconds, between each ring splash
sound on the active line. For example, if a call comes into Line 1,
and then a call comes into Line 2 and you answer Line 2, Line 1 is
automatically placed on hold. While on the active Line 2, after 7
seconds, a ring splash audio sounds on the line reminding you
that the call on Line 1 is still on hold (determined by the "call hold
reminder timer" parameter), and then the ring splash is heard
again after 60 seconds (determined by this parameter).
Notes:
• You must enable the "call hold reminder" and/or "call hold
reminder during active calls" parameter(s), and the "call hold
reminder timer" parameter, for this parameter to work.
• A value of "0" prevents additional rings.
Integer
60
0 to 4294967295
call hold reminder frequency: 50
RN-001029-05 REV 00 – 04.2010