Call Hold Reminder During Active Calls - Aastra 9143i Series Release Notes

New features in release 2.6
Limitations
• The phone does not apply a different volume level to the first part of the call wait-
ing tone.
• The level of the 50Hz modulation signal for ring back is 90%.

Call Hold Reminder During Active Calls

In previous releases, the phone initiated a reminder ring splash when you left a call on
hold after answering a second call on another line, but there was no reminder that a
call was still on hold when the second call was still active.
In Release 2.6, the phones now allow a User or Administrator to enable or disable the
ability for the phone to initiate a continuous reminder tone on the active call when
another call is on hold. For example, when this feature is enabled, and the call on Line
1 is on hold, and then the User answers a call on Line 2 and stays on that line, a
reminder tone is played in the active audio path on Line 2 to remind the User that
there is still a call on hold on Line 1.
When this feature is disabled, a ring splash is heard when the active call hangs up and
there is still a call on hold.
Your can enable or disable this feature using the "call hold reminder during active
calls" parameter in the configuration files or in the Aastra Web UI.
26
RN-001029-05 REV 00 – 04.2010