Gardena CST 2018-Li Operating Instructions Manual page 5

4. Repairs and Maintenance. All the machine parts that
can be replaced personally, are clearly explained in the
"Assembly" instructions chapter. Where necessary, all
other machine parts must be replaced exclusively by an
Authorised Service Centre.
5. Clothing. When using this machine the user must wear
the following approved
individual protective clothing :
close-fitting protective clothing,
safety boots with non-slip
soles, crush-proof toe
protectors and cut-proof
protection, cut-proof vibration-
proof gloves, protective
goggles or safety visor , ear
protection muffs and helmet (if
there is any danger of falling objects). Obtainable from a
workwear supplier
6. Health precautions – Vibrations and Noise levels.
Please be aware of noise restrictions in the
immediate area. Prolonged machine use exposes
the user to vibrations that can generate "white finger
phenomenon" (Raynaudʼs Phenomenon), carpal
tunnel syndrome and similar disturbances.
7. Health precautions – Chemical agents. Use oil
which is approved by the manufacturer.
8. Health precautions - Heat. During use, sprocket and
chain reach very high temperatures, take care not to touch
these parts while hot.
Transport and storage precautions.
Each time the work area is changed to
another location, activate the chain
brake lever. Mount the guide bar cover
guard each time before transporting or
storage. Always carry the machine by
hand with the bar facing backwards, or
when transporting the machine in a
vehicle, always attach it securely to
prevent damage.
Kickback reaction. The kickback
reaction consists of a violent upwards-reverse action of the bar
towards the user. This generally occurs if the upper part of the
bar nose (called the "kickback
danger zone") (see red marking
on the Guide Bar) comes into
contact with some object, or if the
chain is blocked in the wood.
Kickback can make the user
loose control of the machine
provoking dangerous and even
fatal accidents. The chain brake
lever and other safety devices
are not sufficient to protect the
user against injury: the user must
be well aware of the conditions
that can provoke the reaction,
and prevent them by paying very
close attention according to
experience, together with prudent
and correct machine handling (for example: never cut several
branches at a time because this can cause accidental impact
on the "kickback danger zone"
Work area safety
1. Never allow children or people unfamiliar with these
instructions to use the product. Local regulations
may restrict the age of the operator.
2. Only use the product in the manner and for the
functions described in these instructions.
3. Check the whole work area carefully to check for any
danger source (e.g.: roads, paths, electric cables,
dangerous trees, etc)
4. Keep all bystanders and animals well clear of the
work area (where necessary, fence off the area and
use warning signs) at a minimum distance of 2.5 x
the trunk height; in any case no less than ten metres.
5. The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Battery safety
FIRE RISK !
• Never charge the batteries near acids or easily
inflammable materials.
• Only use the original GARDENA Battery Charger
for charging. The use of other battery chargers
may damage the batteries irreparably and even
cause a fire.
RISK OF EXPLOSION !
• Protect your Battery Chainsaw from heat and fire.
• Do not leave on radiators or expose to strong
sunshine for long periods.
1. Only use your Battery Chainsaw in an ambient
temperature between − 10 °C and + 45 °C.
2. The charging cable should be checked regularly for
signs of damage or ageing (brittleness) and may only
be used if it is in perfect condition.
3. The charger unit provided may only be used to
charge the rechargeable batteries supplied with the
Battery Chainsaw.
4. Non-rechargeable batteries must not be charged with
this battery charger (danger of fire).
19