9. Troubleshooting
Motor does Motor turns The machine Motor turns
not start
Make sure the
•
main battery
pack is fitted
Make sure the
•
machine battery
pack is charged
Make sure that
•
chain brake is
not activated
Check that
chain is properly
assembled
and tensioned
Check chain
lubrication as in
6. Operation &
7. Maintenance
Make sure that
the chain is sharp
•
Contact your
authorised centre
Error messages of the error-LED on the battery:
Problem
Motor stops and the error-LED
flashes.
Motor stops and the warning-
LED doesnʼt flash
28
with difficulty starts but
or loses
does not cut at reduced
power
properly
•
•
•
•
•
•
•
•
Possible Cause
1. Battery Overload.
2. High temperature. The allowed Wait approx. 15 min. When the
operation temperature was
exceded.
Battery is discharged.
Braking
improperly or devices do
not stop the
speeds
chain properly
•
•
•
Remedy
Wait 10 sec. When the warning
LED doesnʼt flash, start again.
warning LED doesnʼt flash, start
again.
Charge the Battery.
Motor blocks
No
or stops
charging
during working LED
•