Features And Controls - Briggs & Stratton FACTORY RECONDITIONED PRESSURE WASHER Operating And Maintenance Manual

Features and Controls

Read this Operator's manual and safety rules before operating your pressure washer.
Your pressure washer may resemble one of the units shown below and on the next page. Compare the illustrations
with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this
manual for further reference.
16
8
15
3
13
18
2
1. Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
2. Adjustable Nozzle — (Not shown on some units).
Always attached to nozzle extension. Adjustable nozzle
allows you to adjust spray pressure and spray pattern.
3. Air Filter — Protects engine by filtering dust and
debris out of intake air.
4. Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F (51.6°-68.3°C).
Warm water will discharge from pump onto ground.
This system prevents internal pump damage.
10
9 16
12
17
19
10
9
4 14
5. Detergent Siphoning Tube/Filter — Use to siphon
6. Choke Lever — Prepares a cold engine for starting.
7. Fuel Tank — Fill tank with regular unleaded fuel.
8. Cleaning Tank — Use to hold pressure washer
9. High Pressure Hose — Connect one end to water
4 14
5 19
detergents designed specifically for pressure washers
into the low pressure stream.
Always leave room for fuel expansion.
detergent.
pump and the other end to spray gun.
BRIGGSandSTRATTON.COM
6 15
18
7
3
10 12