Table of Contents
Advertisement
English
a5
Tuner feautures (See page 5)
Station Preset Memory
Store the frequency of a station. You can then recall that
station with a single touch of a button.
1 Select the band/station that you want to have stored.
2 Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
You can store six stations in each of the FM1, FM2, FM3, and
AM bands.
Auto Memory Entry
You can automatically store ali the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
availabfe. Up to six frequencies can be stored this way.
1 Select the band for which you want to store stations.
2 Press the AME button for at least two seconds to start auto
memory entry.
The numbers of the preset station buttons are shown in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
' the last station received.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The-number of the recalled station is displayed.
a Clean Reception System Circuit (CRSC)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Turning CRSC On/Off:
1 Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
2 Keep pressing the m4 button until the Clean Reception System
Circuit function appears in the display.
Press the 4
button to search in the other direction.
The function setting is indicated by "CRSC ON" or
"CRSC OFF" in the display, indicating that the CRSC is on or
off, respectivery.
3 Switching settings.
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it-off.
oe
Advertisement
Table of Contents
