Setting The Indoor Unit Option Code - Samsung MWR-WS00 Installation Manual

Additional Functions (Continued)
12
E-

Setting the Indoor Unit Option Code

In order to set the indoor unit option code using the wired
remote controller, hold down the
the button at the same time for 5 seconds.
1 The menu will display
the indoor unit option code mode.
Note ' ' will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
2 Set the first 6 digits of the 12 or 24 digits of the option code
by pressing the
3 Press the button to set the second set of 6 digits.
If the option code is 24 digits, continue to set the third and
fourth set of 6 digits by pressing the
4 Once the option code is set, press the
the option code to the indoor unit.
5 Press the button to exit.
6 Press the button anytime during setup to exit without
setting.
and buttons and
. Press the button to enter
buttons and the button.
button.
button to transmit