Tracking Your Indoor Unit From The Wired Remote Controller - Samsung MWR-WE10 Service Manual

2-4-2 Tracking Your Indoor Unit from the Wired Remote Controller

Displays the total number of
units searched
1. Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.
2. If you want to perform tracking again after installation, then press the Esc and Delete buttons at the same time for
more than five seconds.
● The system will reset, and tracking will start again.
3. During tracking, the total number of currently searched indoor units and ventilator(ERV) will be displayed.
● If you want to perform tracking again after installation, then press the Esc and Delete buttons at the same time for more than five
seconds.
● Only the master Wired Remote Controller can display the total number of indoor units and ventilator(ERV).
- Slave Wired Remote Controllers do not display the total number of units.
Samsung Electronics
Product Specifications
Indicates tracking in
progress
2-15