Table of Contents
Advertisement
Compensating for the Wired Remote Controller
Temperature Sensor
In order to compensate for the temperature sensor of the wired
remote controller, hold down the
the
button at the same time for 5 seconds.
1
The menu will display
Press the
button until
Press the
button.
Note
'
' will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
2
Press the
and press the
Note
The compensation value range that can be set
is –9°C~ 9°C.
3
Press the
button to exit.
4
Press the
button anytime during setup to exit without
setting.
and
.
is displayed.
buttons to set the compensation value
button.
buttons and
15
E-
Hide quick links:
Advertisement
Table of Contents
