MTD 2010 Shop Manual page 53

For Parts Call 606-678-9623 or 606-561-4983
Dislodger
Figure 6.5
Retainer plate
bolts
Figure 6.6
Clevis pin
Figure 6.7
www.mymowerparts.com
8. Remove the six screws that attach the log dislodger
to the beam using a 9/16" wrench. See Figure 6.5.
NOTE: The 33 ton models only have four screws.
9. Remove the dislodger from the log splitter.
10. Remove the six nuts and bolts that attach the wedge
retainer plates to the wedge using a pair of 3/4"
wrenches. See Figure 6.6.
NOTE: The 33 ton models have a clevis pin held in place
by a cotter pin at the base of the cylinder that must
be removed. See Figure 6.7.
11. Lift the cylinder and control valve off of the log splitter.
The cylinder and wedge weighs 92
! CAUTION ! CAUTION
lbs or more depending on the
model of the splitter.
Wedge and Beam
49