MTD 2010 Shop Manual page 37

For Parts Call 606-678-9623 or 606-561-4983
Jam nut
Straight fitting
Figure 4.6
Elbow fitting
Figure 4.7
www.mymowerparts.com
12. Hold the straight fitting with a 1" wrench.
See Figure 4.6.
13. Back off the jam nut using a 7/8" wrench.
See Figure 4.6.
14. Unthread the straight fitting and valve from the cylin-
der.
15. Place the control valve in a vise with the straight fit-
ting facing up. See Figure 4.7.
16. Remove the straight fitting.
17. Mark the orientation of the elbow to the valve.
18. Loosen the jam nut on the elbow fitting using a 15/16"
wrench.
Control valve
33