For Parts Call 606-678-9623 or 606-561-4983
2010 Log Splitters
6.
Disconnect the high pressure hose from the pump.
7.
Disconnect the high pressure supply hose from the
valve using a 15/16" wrench. See Figure 4.3.
8.
Disconnect the high pressure hose that connects
the valve to the base of the cylinder.
9.
Remove the return hose fitting:
9a.
Hold the fitting with a 1" wrench.
See Figure 4.4.
9b.
Back off the jam nut with a 1" wrench.
9c.
Remove the fitting.
10.
Remove the two screws that hold the valve to the
mounting bracket using a 9/16" wrench.
See Figure 4.5.
11.
Remove the two screws that hold the mounting
bracket to the cylinder using a 1/2" wrench.
See Figure 4.5.
32
www.mymowerparts.com
Control valve
Figure 4.3
Return hose fitting
Jam nut
Figure 4.4
Figure 4.5
Hose to the
cylinder
high pressure
supply hose
Mounting bracket