Table of Contents
Advertisement
SOLO 1200
PR-2902
This product manual contains important information about the safe installation and
use of this projector. Please read and follow these instructions carefully and keep this
manual in a safe place for future reference.
PR LIGHTING LTD.
No. 571, Yingbin Road, Dashi, Panyu, Guangzhou, 511430 China
h t tp : / / w w w . p r - l i g h t i n g . c o m
Advertisement
Table of Contents
Related Manuals for PR Lighting Solo 1200
Summary of Contents for PR Lighting Solo 1200
- Page 1 SOLO 1200 PR-2902 This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual in a safe place for future reference. PR LIGHTING LTD. No. 571, Yingbin Road, Dashi, Panyu, Guangzhou, 511430 China...
-
Page 2: Table Of Contents
Please read and follow these instructions carefully and keep this manual in a safe place for future reference. SOLO 1200 is an innovative projector with an elegant housing, which is of Pan’s and Tilt’s locks for maintenance and high quality fans free from noise. The projector has 2 types of clamps for mounting at any direction and position. -
Page 3: Safe Usage Of The Projector
Always disconnect from the mains, when the device is not in use or before cleaning it or before attempting any maintenance work. If you have any questions, don’t hesitate to consult your dealer or manufacturer. 3/18 SOLO 1200 EN.doc... -
Page 4: Installing The Projector
Always ensure that the structure that you are going to mount the projector is secure and is strong enough to support a weight of SOLO 1200. WARNING: 1. Unlock the PAN and TILT before the 1 application of projector for safety. -
Page 5: Control Connections
Note: care should be taken to ensure that none of the pins touch the metallic body of the plug or each other. The body of the plug is not connected in any way. The SOLO 1200 accepts digital control signals in protocol DMX512 (1990). -
Page 6: Dmx Terminator
TO SET THE DMX START ADDRESS Each SOLO 1200 must be given a DMX start address so that the correct projector responds to the correct control signals. This DMX start address is the channel number from which the projector starts to “listen”... -
Page 7: Functions Display
SET DIMMER INVERT(Defaultaa:OFF) DIMMER INVERT OFF DIMMER INVERT ON SET IRES INVERT(Defaultaa:OFF) IRES INVERT OFF IRES INVERT ON SET ZOOM INVERT(Defaultaa:OFF) ZOOM INVERT OFF ZOOM INVERT ON RESET (Default : OFF) DISABLED ENABLED AND LOAD ALL DEFAULTS (CONTINUE) 7/18 SOLO 1200 EN.doc... - Page 8 TEST MENU DEBUG MODE (Default:OFF) EXIT DEBUG MODE AND RESET ACCESS DEBUG MODE SELF-TEST MODE (Default:OFF) EXIT SELF-TEST MODE AND RESET ACCESS SELF-TEST MODE LAMP MENU ( Default : STAT ) DISPLAY STATE OF LAMP (END) 8/18 SOLO 1200 EN.doc...
-
Page 9: Replacing Gobos
Base Tilt’s belts The common users replacing the belts is not Open the door recommended. White.Note: stay 5 seconds while DMX value is 5, 6or 7, the function reset perform 9/18 SOLO 1200 EN.doc... -
Page 10: Dmx Control Channel Functions
DMX CONTROL CHANNEL FUNCTIONS The SOLO 1200 uses 18 DMX channels. They are listed in the following table. Channel Function DMX Value Description 000-009 Blackout 010-020 Open 021-034 Strobe 1 Strobe 2 035-048 Strobe 3 049-062 Strobe 4 063-076 Strobe 5... - Page 11 0~540º index 121-127 Rotation speed 1 Rotation speed 2 128-135 Rotation speed 3 136-143 Rotation speed 4 144-151 Rotation speed 5 152-159 Rotation speed 6 160-167 Rotation speed 7 168-175 Rotation speed 8 176-183 184-191 Stop rotating 11/18 SOLO 1200 EN.doc...
- Page 12 18 channel to value 224-255 immediately after turning it off, or push the slide bar to value 224-255 to wait it cooling. Under these 2 circumstances, the lamp can not be turned on. The 12/18 SOLO 1200 EN.doc...
-
Page 13: Led Indication
20 days and clean the internal optics at least once every 30 / 60 days. Do not use any organic solvent, e.g. alcohol, to clean the reflector mirror, dichroic colour filters or housing of the apparatus. 13/18 SOLO 1200 EN.doc... -
Page 14: Troubleshooting
LIGHT OUTPUT 22.6° （ lux ） 8625 2156 16° （ lux ） 11980 2995 1330 22.6° 16° DISTANCE (m) 16° DIAMETER (m) 1.41 2.82 4.23 6.64 7.05 22.6° DIAMETER (m) 2.00 4.00 6.00 8.00 10.0 14/18 SOLO 1200 EN.doc... -
Page 15: Technical Data
DMX controlled focus SHUTTER: Double shutter blades, 0-100% linearly adjustable STROBE: 0.3~6 F.P.S. HEAD MOVEMENT: Pan 540º, Tilt 270º BEAM ANGLE: 16º~ 22.6º CONTROL: DMX512, 18 Channels HOUSING: Composite plastic (IP20) NET WEIGHT: 40 Kg SIZES: 640 670 15/18 SOLO 1200 EN.doc... -
Page 16: Electrical Diagram
ELECTRICAL DIAGRAM 16/18 SOLO 1200 EN.doc... -
Page 17: Component Order Codes
230020162 POWER PCB 230020098 NOTE: You may order all parts of the SOLO 1200 besides the table listed above. When ordering please state the exact name and part no. Repairs must be carried out by a qualified technician. 17/18 SOLO 1200... - Page 18 PR LIGHTING LTD. No. 571, Yingbin Road, Dashi, Panyu, Guangzhou, China Post-Code: 511430 TEL: +86-20-8478 1888 FAX: +86-20-8478 6023 P/N: 321010223 Last Revision: 07:05:2006 18/18 SOLO 1200 EN.doc...
Need help?
Do you have a question about the Solo 1200 and is the answer not in the manual?
Questions and answers