Winterhalter UC-S Repair Manual page 35

Procedures (continuation)
Cut through the belts on the intake socket and remove the hose
Installation of the new heat exchanger (item no. 30 000 190)
Disconnect heat exchanger and radial fan of each other
Fix the new heat exchanger with new seal on the radial fan
Installation of a new radial fan (item no. 30 000 189)
Disconnect heat exchanger and radial fan of each other
Remove the intake socket on the radial fan
Fix the intake socket with new o-ring seal on the new radial fan
Fix the heat exchanger with new seal on the radial fan
Installation of the complete unit
Apply a new o-ring seal
The installation is carried out in reverse order. The hose (picture 7) must
be fixed with 2 cable ties to the intake socket.
After the assembly:
Carry out a function test
Carry out a safety test according to VDE 0701
33