Winterhalter UC-S Repair Manual page 33

Procedures
Required material:
Tool:
Important note:
Observe the safety notes on page 7
De-install the machine
Pull forward the upper cover plate
Pull off the bus cable that is attached to the Master
Pull off the grounding cable; remove the cover plate
Pull off the hoses on the right of the heat exchanger
On the riser, pull off the hose attached to the heat exchanger
Pull off the plug on the motor
Unscrew the fastening of the motor
Unscrew the fastening nut of the heat exchanger
Lift the heat exchanger with motor and turn it
Kit heat exchanger
Item no. 30 000 190 and / or
Kit radial fan
Item no. 30 000 189
Ring wrench 60003376
The machine must be de-installed
31