Reversing The Door Of Your Wine Cooler; Installation - Baumatic BWC614SS User Manual

o Remove the door gasket on the side you wish to install the
handle. You can see two designated holes for handle installation.
o Install the handle tightly as shown in the diagram above with the
two screws, lock washers and flat washers provided.
o Replace the door gasket.

Reversing the door of your wine cooler

This appliance has the capability of the door opening from either the
left or right hand side.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
o Open the glass door and remove the two lock screws holding the
door shaft assembly to the glass door. Be careful to hold the
glass door firmly after removing the screws.
o Pull down to remove the glass door and place it on a padded
surface to prevent scratching it.
Remove the two screws from the left door bottom and install
o
them to the right door bottom.
22