Using Your Baumatic Wine Cooler; Before Switching On - Baumatic BWC614SS User Manual

2) Two cooling zones
o There are two cooling zones inside of your wine cooler; they are
separated by a middle partition.
o Each cooling zone has an independent temperature control and
temperature display.
3) Interior light
o The wine cooler has an interior light. The light can be switched
on and off by using the light control button (6).
4) The wine cooler shelves
o The wooden shelves are fully adjustable to suit various wine
bottle shapes and sizes.
o To prevent damaging the door gasket, make sure the door is
fully open when pulling shelves out of the rail compartment.
o For easy access to the bottles stored, pull the shelves out
approximately 1/3. The shelves are designed with an emergency
stop to prevent them being removed too far when loaded.

Using your Baumatic wine cooler

Before switching on

o Make sure that it has been installed by a suitably qualified
person, as
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
per the information contained in Baumatic's
10