Defrosting; Removing The Shelves For Cleaning - Baumatic BWC614SS User Manual

o After washing the appliance, wipe over the area
that you have cleaned with a damp cloth and then
dry it thoroughly.
o When cleaning is complete, dry your hands and then reconnect
the plug to your mains supply.

Defrosting

o Defrosting occurs automatically inside of the wine cooler during
operation. The defrost water is collected by the evaporating tray
and evaporates automatically.
o The evaporating tray and defrost water drain hole should be
cleaned periodically. This will prevent water from collecting in
the bottom of the wine cooler, instead of flowing down the
defrost drainage channel and drain hole.
o You can also pour a small amount of water down the drain hole
to clean inside of it.
o You should be careful to make sure that wine bottles do not
touch the rear wall of the appliance, as this can interrupt the
automatic defrosting process and deflect water into the base of
your wine cooler.

Removing the shelves for cleaning

o To remove any of the shelves from the rail compartment, move
the shelf to the position where the notch of wooden shelf is
exactly under the plastic post and lift the wooden shelf. Please
ensure these are replaced when the shelf is put back.
o Make sure the shelves are fully engaged before loading any
bottle into the cooler. Pull the shelves out all the way to the
STOP position and push them back in several times to make sure
the shelves are properly engaged.
17