Installing The Handle; Reversing The Door Of Your Wine Cabinet - Baumatic BWC600SS Instruction Manual

Installing the handle

o Remove the door gasket on the side you wish to install the
handle. You can see two designated holes for handle installation.
o Install the handle tightly as shown in the diagram above with the
two screws, lock washers and flat washers provided.
o Replace the door gasket.

Reversing the door of your wine cabinet

This appliance has the capability of the door opening from either the
left or right hand side.
Any parts that you remove from the appliance whilst
reversing the door, should be retained for later use.
o Open the glass door and remove
the two screws, under the right
bottom corner of the glass door,
that are used to hold the right
lower hinge to the door shaft
assembly.
o Be careful to support the glass
door with both hands to prevent it
dropping after
screws.
removing the
22