Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic BWC455BGL
Summary of Contents for Baumatic BWC455BGL
- Page 1 BWC455BGL Built-in wine cabinet...
- Page 2 USER MANUAL FOR YOUR BAUMATIC BWC455BGL 24 Bottle built-in electronic wine cabinet NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
-
Page 3: Table Of Contents
Product specifications 7 - 8 Description of the appliance Control panel Description of the product features 9 -10 Using your Baumatic wine cabinet 10-15 Before switching on During first use Turning the appliance on and off Unlocking the control panel... -
Page 4: Environmental Note
This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the... -
Page 5: Important Safety Information
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. - Page 6 Child safety o Packaging material should be kept away from children. o This appliance is intended for use by persons with sufficient experience and knowledge of electrical appliances. other persons (including children) should be supervised or given instruction concerning use of the appliance by a person responsible for their safety.
-
Page 7: Specifications Of Your Wine Cabinet
Service You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please Specifications of your wine cabinet Dimensions of appliance Height: 455 mm Width: 592 mm Depth: 560 mm... -
Page 8: Description Of The Appliance
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the front left edge of the appliance. -
Page 9: Control Panel
Control panel The control panel is located at the top of the appliance. Description of the product features Control panel o The control panel is located at the top of the appliance, behind the glass door. This means it is easy to set the temperature of the appliance and see what temperature the appliance is set to. -
Page 10: Using Your Baumatic Wine Cabinet
The deep shelves have telescopic rails which have stoppers of their own. Using your Baumatic wine cabinet Before switching on o Make sure that it has been installed by a suitably qualified person, information contained Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. -
Page 11: During First Use
During first use IMPORTANT: When you use the wine cabinet for the first time or restart the appliance after it has been turned off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED display. -
Page 12: The Interior Light
The interior light o When the control panel is unlocked, you can use the light button to switch the interior light on and off. o The light will remain on unless it is turned off manually by pressing the light button. Setting the temperature o The temperature setting for the appliance is adjustable within the range of 5°C - 22°C / 41°F - 72°F. -
Page 13: Loading The Wine Cabinet
Loading the wine cabinet o IMPORTANT: Your appliance is ideally suited to store 0.75 litre Bordeaux style wine bottles. You must make sure that they do not prevent the door from shutting properly. o Always check that you can close the door without it fouling on a wine bottle, before shutting it. - Page 14 o Wines kept at a higher temperature will age faster. Wine that is exposed to temperatures that are greater than 21°C (70°F) will suffer from poorer flavour and aroma. o If wine is kept at too low a temperature, this can result in the development of harmful deposits.
-
Page 15: Wine Storage Problems
Wine storage problems Corking- a tiny percentage of bottled wine (about 1%) will suffer from this. The cork reacts with the wine and gives it a musty, unpleasant taste. It is the most common wine storage problem and is caused by harmless bacteria growing on the cork. -
Page 16: Cleaning And Maintenance
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The interior of the wine cabinet should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. -
Page 17: Moving Your Wine Cabinet
o You should be careful to make sure that wine bottles do not touch the rear wall of the appliance, as this can interrupt the automatic defrosting process and deflect water into the base of your wine cabinet. Moving your wine cabinet If you need to move your wine cabinet to another location you should follow the steps outlined below. -
Page 18: Installation
Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the wine cabinet. -
Page 19: Positioning
o When the connection is completed, no stray strands or cut wire should be present. The cord clamp must be secured over the outer sheath. Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. -
Page 20: Built-In Installation
Built-in installation o The dimensions shown in the diagram above will need to be followed. o The ventilation requirements shown in the diagram above must be followed. o To protect the glass door prior to installation the appliance is fitted with 4 white levelling feet which prevent the glass door touching the floor before it is installed. -
Page 21: Installing The Handle
o To secure the appliance to the kitchen cabinet, tighten the 2 screws on the mounting bar, which is fixed to the bottom of unit, into kitchen cabinet. o You also install additional top mounting bar, which is supplied with the appliance, onto the top of the appliance to secure it to the kitchen cabinet. -
Page 22: Reversing The Door Of Your Wine Cabinet
Reversing the door of your wine cabinet This appliance has the capability of the door opening from either the left or right hand side. o The instructions provided below are based on a cooler with a right door hinge installed already. 1) Loosen the 2 screws with a cross screwdriver and take off the upper right hinge cover. - Page 23 4) Pull the harness wires one by one out of the upper right hinge hole through its gap and remove the upper right hinge. 5) Tidy the harness and carefully push it back into the door frame and cover it with the right door corner cover.
- Page 24 8) Loosen the 2 screws to take out the harness cover from the top left side of the cabinet. 9) Install the harness cover at the top right side of the cabinet to cover the harness there. 10) Install the bottom hinge on the bottom left side of the cabinet with 4 screws.
- Page 25 IMPORTANT: Check that the door opens and shuts correctly, without fouling, after you have completed the door reversal process. After the door has been reversed, you should check the door seal of the wine cabinet. The seal should not be creased or crushed; otherwise there will be a gap between it and the inside of the door.
-
Page 26: Reversing The Door Handle
Reversing the door handle 1) Remove the gasket on the right inner side of the door to expose the 2 decorative screws. Unscrew them in a clockwise direction with a flat blade screwdriver and then loosen them in an anti- clockwise direction, using your fingers, from the outer side of the door. - Page 27 4) Install the 2 decorative screws into the holes at the left side of the outer door.
-
Page 28: Troubleshooting
Troubleshooting IMPORTANT: If your wine cabinet appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. PROBLEM POSSIBLE CAUSE The wine cabinet will not operate. The appliance is not plugged in. The appliance is turned off. The circuit breaker tripped or a fuse has blown. - Page 29 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance.
-
Page 30: Baumatic Consumables
BC005 Stainless Steel Cleaner and Protector (250ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk... -
Page 31: Technical Data
Technical Data Manufacturer BAUMATIC Model Number BWC455BGL Product Category 2 – Refrigeration-cellar, Cellar and wine storage appliances Energy Efficiency Class (1) Annual Energy Consumption (2) 226 kWh Storage Volume of Fridge 55 litres Compartment Storage Volume of Freezer Compartment Star Rating Coldest Storage Temperature 5°C... -
Page 32: Contact Details
United Kingdom Baumatic Ltd., Baumatic Buildings, Czech Republic 6 Bennet Road, Baumatic CR s.r.o. Reading, Berkshire Lípovà 665 RG2 0QX 460 01 Liberec 4 United Kingdom Czech Republic Sales Telephone +420 483 577 200 (0118) 933 6900 Sales Fax www.baumatic.cz...