Using Your Baumatic Wine Cabinet; Before Switching On - Baumatic BWC614SS-ANZ User Manual

140 cm 92 bottle dual temperature wine cabinet
Table of Contents

Advertisement

o Each cooling zone has an independent temperature control and
temperature display.
3) Interior light
o The wine cabinet has an interior light. The light can be switched
on and off by using the light control button (6).
4) The wine cabinet shelves
o The wooden shelves are fully adjustable to suit various wine
bottle shapes and sizes.
o To prevent damaging the door gasket, make sure the door is
fully open when pulling shelves out of the rail compartment.
o For easy access to the bottles stored, pull the shelves out
approximately 1/3. The shelves are designed with an emergency
stop to prevent them being removed too far when loaded.

Using your Baumatic wine cabinet

Before switching on

o Make sure that it has been installed by a suitably qualified
person,
as
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned with a
solution of sodium bicarbonate dissolved in lukewarm
water.
The
thoroughly dried, after the cleaning process has been
completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
per
the
information
interior
and
accessories
contained
in
Baumatic's
should
be
10

Advertisement

Table of Contents
loading

Table of Contents