Lcd Settings Page; Power Management Page - D-Link DNS-346 User Manual

D-Link DNS-346 USER'S MANUAL
The LCD Display Settings allow the administrator to change the time it takes for the OLED screen on
the front of the DNS-346 to power off.
Sleep: Click on the drop-down box below to change the time it takes for
the OLED screen to power off.
Click on the Save Settings button to accept these changes.
Click on the Don't Save Settings button to discard these
changes.
The DNS-346 Power Management feature allows you to configure the drives to shut down while
power remains constant to the device. The drives will power up again when data is accessed.
Power Management: Use the radio buttons to Enable or Disable the Power Management
feature.
Hibernate Hard Disks: Use the drop-down menu to set the amount of time before idle
drives will be shut down.
Power Recovery: Enable this feature to turn Power Recovery on.
Click on the Save Settings button to accept these changes.
Click on the Don't Save Settings button to discard these
changes.

LCD Settings Page

Power Management Page

Page 60 of 85