Lan Setup Page - D-Link DNS-346 User Manual

D-Link DNS-346 USER'S MANUAL
The LAN Settings section allows the user to configure the link speed and to configure the IP address
as a DHCP client or Static IP.
Enabling Jumbo Frames allows the user to increase the frame size from 3,000 to 9,000 bytes which
increases the network throughput and performance. Standard Ethernet frames are 1,500 bytes in size.
Link Speed: The LAN link speed is set to Auto by default, but can be manually
set to 100Mbps or 1000Mbps.
DHCP Client: Selecting DHCP Client will cause the DNS-346 to obtain an IP
address from the local DHCP server.
Static IP: Selecting Static IP requires you to assign the IP information for
the DNS-346 manually.
Jumbo Frames: The DNS-346 can support Jumbo Frames that are between 3000
and 9000 bytes in size. In order to enable Jumbo Frames on the
DNS-346, click the Enable radio button and select the MTU size
from the drop-down menu. Click the Apply button to save any
changes made.
Click the Save Settings button to apply and save the new settings. If you have changed the IP address or selected DHCP client, it will be necessary to log in again using the new
IP address. If you do not know the new address (which is likely to be the case when changing from a static IP address to DHCP client), use the Easy Search Utility on the
Installation CD to obtain the IP address of the device.

LAN Setup Page

Page 22 of 85