D-Link DNS-346 User Manual page 19

D-Link DNS-346 USER'S MANUAL
Step 4: Configure the IP settings for your device. If you are using a DHCP
server such as a router on your network, the DNS-346 will
automatically obtain the IP settings. If you prefer to assign a Static
IP address, select this option and type the IP settings for the
device.
Click on the Next button to accept these changes and continue.
Click on the Back button to go back to the previous options.
Click on the Exit button to discard these changes.
Step 5: The following screen allows you to choose your network type.
If your network is configured as a Workgroup, click the
Workgroup radio button.
Enter the Workgroup, name and description for your DNS-346, or
leave the default values.
Click on the Next button to accept these changes and continue.
Click on the Back button to go back to the previous options.
Click on the Exit button to discard these changes.
Page 19 of 85