D-Link DNS-346 User Manual page 81

D-Link DNS-346 USER'S MANUAL
Target: Display the iSCSI target name you chose.
Partition Size: Tick the Use Maximum Available Space checkbox to specify that
the maximum available space on the disk will be used to create
the new partition. To specify a size un-tick the checkbox and type
in the amount of size in megabytes in the Megabytes field.
Format Type: Choose whether to format the new partition with NTFS or FAT32
by ticking the appropriate checkbox.
Drive Letter: Choose the drive letter that you want to allocate to the iSCSI
partition from the drop-down menu.
When you have finished configuring the Target Settings, click the
Format button to see the window below.
Configuring Disks: This window appears after clicking the Format button. Or, select a
target in the iSCSI Drive Mapping list and click the Management
button to see the window.
The Management window allows you to manage partition on the
disks installed in the DNS-346 and Unmount / Mount the disks
installed in the DNS-346.
The Disk Management section displays the following parameters:
Disk: Displays the ID number of the disk installed in the DNS-346.
Partition: Displays the Partition number of the disks partition.
Volume: Displays the drive letter that the partition is mapped to on the
client machine.
File System: Displays the File System that the partition was formatted with.
Capacity: Displays the total capacity of the partition.
Target: Displays the iSCSI target name of the partition.
Adding: Right-click an Unallocated partition and click Add.
Page 81 of 85