Section - Configuration
Click Restart to reboot your DSM-600.
System Restart:
Click Restore to reset the DSM-600 back
Restore
to Factory
to the factory default settings - erasing all
Defaults:
changes you have made.
Click shutdown to turn off your DSM-600
System
shutdown:
Configuration
You can save all device settings to a file
Settings:
which can be saved to your computer. Then
later, if something happens and you need
your settings back, you can load them up
again by loading this file.
Enter the time (in minutes) for the idle time
Idle Time:
in both the Scheduling and Config sections.
Users will be logged off if the idle time is
exceeded.
Click Apply to save your settings.
Apply:
D-Link DSM-600 User Manual
System
Restore Settings
Configuration File
Idle Time