Rear Panel (Connections) - D-Link ShareCenter DNS-343 User Manual

Drive Eject Levers
Power Receptacle
Drive Eject Levers
COMPONENT
Drive Eject Levers
Reset Button
Power Receptacle
USB Connector
Gigabit Ethernet Port
Cooling Fans
Warning:
Only power cords are allowed to be inserted into the EUT socket-outlet, no other direct plug-in equipment.
D-Link DNS-343 User Manual

Rear Panel (Connections)

Reset Button
DESCRIPTION
Use the provided levers to eject the SATA hard drives.
Press this button for over 5 seconds to reset the unit to factory defaults.
Connect the 19V / 4.74A power supply to the receptacle.
1 x USB 2.0 (Type A) connector. USB Host port for Print Server or USB UPS monitoring.
Use the Gigabit Ethernet Port to connect the DNS-343 to the local network.
The cooling fans are used to cool the hard drives and feature speed control. When the unit is first powered on the fans
rotate at a low speed and rotate at a high speed when the temperature rises above 49 °C.
Cooling Fan
Gigabit Ethernet Port
USB Port
Cooling Fan
8