Rear Panel - D-Link DSM-G600 Install Manual

Wireless network storage enclosure

Hide thumbs Also See for DSM-G600:

Hardware Overview

Rear Panel

Antenna

Connects to a

wireless network.

Dismount Button

Press to safely remove USB

drives from the DSM-G600.

USB 2.0 Ports

Use these ports to connect USB 2.0 drives.

USB 1.1 drives may also be connected but

will be limited to USB 1.1 speed.

Reset Button

Pressing the reset button for 10 seconds with

a paper clip will restore the unit to the original

factory default settings. The button is inside the

hole to prevent an accidental reset.

Power Receptor

Receptor for the supplied

power adapter.

LAN Port

Connects to your Ethernet network. The LAN port

supports Auto MDI/MDI-X, allowing you to connect a

straight-through or crossover cable.

DSM-G600 Install Guide

Fan/Vent

Fan to cool the internal

hard drive.

D-Link Systems, Inc.

Table of Contents