Ftp Server Page - D-Link ShareCenter DNS-343 User Manual

The DNS-343 is equipped with a built in FTP Server. The server is easy to configure
and allows users access to important data whether they are on the local network or at a
remote location. The FTP server can be configured to allow user access to specific
directories, and will allow up to 10 users to access the DNS-343 at a time.
Category:
Determines whether the FTP server rule will apply to an
individual user or a group.
User / Group:
Select the user or group the FTP server rule will apply
to..
Folder:
Browse to and select the folder or directory you are
granting FTP access to. Ticking the root check box
grants access to all volumes.
Permission;
Use the drop-down menu to set the user or group
permission to Read Only or Read/Write.
Max User:
Sets the maximum amount of users that can connect to
the FTP server.
Idle Time:
Sets the amount of time a user can remain idle before being disconnected.
Port:
Sets the FTP port. Default is 21.
Flow Control:
Allows you to limit the amount of bandwidth available for each user.
Client Language:
Most standard FTP clients like Windows FTP, only support Western European code page when transferring files. Support has been added for non
standard FTP clients that are capable of supporting these character sets.
Please Note:
To be able to use this function, the FTP port must be set. The default option is port 21.
D-Link DNS-343 User Manual

FTP Server Page

32