Section 1 - Product Overview
Dismount Button
Press to safely remove USB
drives from the DSM-600.
D-Link DSM-600 User Manual
Rear Panel
Reset Button
Pressing the reset button for 10
seconds with a paper clip will restore
the unit to the original factory default
settings. The button is inside the hole
to prevent an accidental reset.
USB 2.0 Ports
Use these ports to connect USB 2.0
drives. USB 1.1 drives may also be
connected but will be limited to USB
1.1 speed.
Power Receptor
Receptor for the supplied
power adapter.
LAN Port
Connects to your Ethernet
network. The LAN port supports
Auto MDI/MDI-X, allowing you
to connect a straight-through or
crossover cable.