Storing Non-English Character Files; Replacing Or Adding A New Hard Drive; Secure Http Login - D-Link ShareCenter DNS-343 User Manual

By default the DNS-343 will support Unicode which is an industry standard allowing computers to consistently represent and manipulate text expressed
in most of the world's writing formats.
It is recommended that you backup your important files before replacing or adding a new hard drive to the DNS-343.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you install the new drive, turn on the DNS-343 and then connect to the Web UI. The DNS-343 will
prompt you to format the new drive. Refer to page 12.
Adding a New Hard Drive:
The DNS-343 is able to work with one single hard drive, two, three and four hard drives. Please make sure the power is off before installing a new hard drive.
After you install the new drive(s), turn on the DNS-343 and then connect to the Web UI. The DNS-343 will prompt you to format the new drive(s). Refer to page 12.
Please Note:
Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting a hard drive!
Apart from logging into the web user interface using the normal http://192.168.69.32/, user can also login to the web configuration using secure https.
1) Open Internet Explorer and type https://192.168.0.32
2) Login to the DNS-343 as per normal.
D-Link DNS-343 User Manual

Storing non-English Character Files

Replacing or Adding a New Hard Drive

Secure HTTP Login

78