Rear Panel (Connections) - D-Link DNS-327L User Manual

Section 1 - Product Overview
Power Receptacle
COMPONENT
Cooling Fan
Gigabit Ethernet Ports
Power Receptacle
USB Port
Latch
Security Lock
DNS-327L
D-Link ShareCenter

Rear Panel (Connections)

Top Panel
Security Lock
DESCRIPTION
The cooling fan is used to cool the hard drives and features speed control. When the unit is first powered on, the fans
rotate at a low speed and later rotate at a high speed when the temperature rises above 49 °C.
Use the Gigabit Ethernet port to connect the ShareCenter
LED on the left will illuminate solid green for a good connection and will blink during data transmission. If this LED is
off, check the connection/cable to the device you are connecting to. The LED on the right will light solid for a Gigabit
connection and will remain off when connected to a 10/100 device.
Connect the supplied power cord to the receptacle.
A single USB 3.0 (Type A) connector. The USB Host port is for Print Servers, USB memory disks, or USB UPS monitoring.
Press the latch to release the Top Panel and insert or remove the hard drives
Prevent theft by tying a cable to the ShareCenter
User Manual
Latch
Label
Cooling Fan
USB Port
Gigabit Ethernet Port
™
to the local network. The port is equipped with 2 LEDs. The
™
NAS and a desk. Cable is sold separately.
10