Raid Page - D-Link ShareCenter DNS-343 User Manual

The DNS-343 supports the following configuration types:
Standard, where each drive is a unique volume, JBOD, which combines both drives in
a linear fashion to create one volume, RAID 1 and RAID 5 with a Basic Configuration
and a combination of RAID 0/JBOD, RAID 1/JBOD and RAID 5/JBOD for Custom
Configuration.
RAID Configuration:
Click Set RAID Type and Re-Format to
change the current drive configuration.
If you already have one drive installed and intend to
install additional drives, the DNS-343 allows you
to change the drive configuration from Standard to
JBOD, RAID 1, RAID 5 or a combination of RAID0/
JBOD, RAID1/JBOD or RAID5/JBOD.
Configure Newly
If you have installed an additional hard drive and
Inserted Hard
"skipped" the configuration, you will see there is an
drive(s):
additional option allowing you to configure the new
hard drive. This will erase all the data stored on the
new hard drive.
Auto-Rebuild
Select to enable or disable Auto-Rebuild Configuration.
Configuration:
When the DNS-343 has been configured
as a RAID array the Auto-Rebuild function
allows a degraded RAID array to rebuild when the
failed hard drive is replaced by restoring data from the
existing hard drives to the newly inserted hard drive.
Please Note:
Rebuilding will erase all the data on the newly inserted drive.
D-Link DNS-343 User Manual

RAID Page

25