Rear Panel (ConnectOns) - D-Link DNS-313 User Manual

Secton 1 - Product Overvew
COMPONENT DESCRIPTION
System Fan The system fan is used to cool the hard
drive when triggered on by the thermal
sensor. It remains idle if not needed.
Do not block this opening.
Reset Button Use this to reset the DNS-313 to factory
default settings. To reset, insert a ballpoint
pen and hold the recessed button down for
a few seconds.
USB Port USB port for connecting to a desktop or
notebook as a USB 2.0 portable drive.
Ethernet Port A Gigabit Ethernet port that connects the
DNS-313 to the local network.
Drive Eject Lever Use the provided lever to eject the hard
drive. The front panel must be removed
before ejecting the drive.
Power Insert The 12V/ 3A power supply connects here.
D-Lnk DNS-313 User Manual

Rear Panel (Connectons)

Cooling Fan
Reset Button
USB Port
Drive Eject Lever
Ethernet Port
Power Receptacle
5