Rear Panel (Connections) - D-Link ShareCenter DNS-345 User Manual

Section 1 - Product Overview
HDD Eject Lever
HDD Eject Lever
Power Receptacle
HDD Eject Lever
HDD Eject Lever
COMPONENT
Cooling Fan
Gigabit Ethernet Ports
Power Receptacle
USB Port
Reset Button
HDD Eject Lever
D-Link ShareCenter DNS-345 User Manual

Rear Panel (Connections)

Cord Hook
DESCRIPTION
The cooling fan is used to cool the hard drives and features speed control. When the unit is first powered on, the fans
rotate at a low speed and later rotate at a high speed when the temperature rises above 49 °C.
Use the Gigabit Ethernet ports to connect the ShareCenter to the local network. Each port is equipped with 2 LEDs. The
LED on the right will illuminate solid green for a good connection and will blink during data transmission. If this LED
is off, check the connection/cable to the device you are connecting to. The LED on the left will light solid for a Gigabit
connection and will remain off when connected to a 10/100 device. Dual LANs support Port Bonding.
Connect the supplied power cord to the receptacle.
A single USB 2.0 (Type A) connector. The USB Host port is for Print Servers, USB memory disks, or USB UPS monitoring.
Press and hold this button for more than 5 seconds to reset the unit to factory defaults.
Use each slot's lever to eject the HDD drive .
Cooling Fan
Reset Button
Gigabit Ethernet Ports
USB Port
Cooling Fan
10