Device Page - Active Directory - D-Link ShareCenter DNS-343 User Manual

If your network is configured in an Active Directory make sure the following conditions
are true:
• Ensure that the Time and Date is synchronized between the DNS-343 and the
Windows Active Directory server. The DNS-343 and Active Directory server will
only tolerate a maximum time difference of 5 minutes.
• Ensure that you can get the IP address of the 2003/2008 AD server from the DNS server. The DNS1 and DNS2 settings are the same as the LAN Setup. Please make
sure this is working properly.
To configure the DNS-343 to use Active Directory, click the Active Directory radio button and configure the parameters as described below:
Username:
Input the username of an account setup on the
Active Directory that requires access to the
resources on the DNS-343.
Password:
Input the password of the chosen Active Directory
user account.
Host Name:
Input a Domain Name Service (DNS) name for
the DNS-343. If the device connecting to the
DNS-343 is a browser or logon server this will
be the name that these services are advertised
by.
Workgroup:
Enter your Workgroup name here. The workgroup name should be the same as the computers on the network. Devices using the same
workgroup will have additional file sharing methods available.
Realm Name:
Input the FQDN (Fully Qualified Domain Name) of the Active Directory Domain in this field. This option specifies the Kerberos realm to use.
AD Server Name:
Input the name of the Active Directory Server in this field. When the Windows user attempts to access the DNS-343 at login time, the DNS-
343 will connect to the 2003 AD Server and attempt to authenticate the given user with the given password.
Click the Save Settings button when you have finished configuring the Active Directory settings.
Please Note:
For this feature to be enabled the user has to install the ADS Add-on available for this device.
D-Link DNS-343 User Manual

Device Page - Active Directory

23