Table of Contents
Advertisement
Handset Display
=
The handset shows you information and instructions on the display.
These display prompts are shown below.
The Caller List for both lines is empty.
No
items
stored
The battery needs to be charged. Place the
Recharge
handset on the base unit to charge the battery
(p. 14).
The display shows the number of new calls for
12 new
calls
both lines and the battery strength (p. 14) while
{M88] | the handset is on the base unit.
s 4%
This display will be shown when:
12
new
calls
— you lift the handset off the base unit, or
V=New
A=Old | — SEARCH V) or (A) is pressed when the
handset is off the base unit.
To search from the most recent call, press
SEARCH (V) (New key). To search from the oldest
call, press SEARCH (A) (01a key) (p. 30).
When the handset ringer volume is set to OFF for
'Ringer
off"
both lines (p. 21), "Ringer
off"
will flash for
about 45 seconds before the handset returns to
the stand-by mode (p. 15).
Talk
During a conversation, the display shows the
length of the call (ex. 1 hour, 6 minutes and 35
01-06-35
{88N) | Seconds). The battery strength is also displayed.
The handset has lost communication with the
Out
of range
base unit. Move closer to the base unit.
While programming, the handset lost
Save
error
communication with the base unit. Move closer to
the base unit.
callers name, number and the called line after
1-000-222-3333
the first ring.
WO
Advertisement
Table of Contents
