Table of Contents
Advertisement
GPS
System – I/O Control – GPS
Baud Rate: The speed used to transmit instructions or information through the GPS on the DVR. Choose from
the following speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 BPS.
Data Bit: The number of data bits used in a data packet or word. This can be set to 8 or 7.
Stop Bit: This field is to set the number of stop bits indicating the end of a data packet. This can be set to 1 or 2.
Parity: This selects the transmission error-checking rule. Choose either None, Odd, or Even.
Control
One remote control can be used to operate several DVRs. The DVR to be addressed is selected by pressing the
key corresponding to its ID number on the remote control.
Remote Controller ID: ID used by the remote control to select this DVR.
Click
button to return to the previous level of menu.
53
Advertisement
Table of Contents
