Table of Contents
Advertisement
Upper Left Latitude.: Set Upper Left Latitude if border type is rectangle.
Upper Left Longitude: Set Upper Left Longitude if border type is rectangle.
Lower Right Latitude: Set Lower Right Latitude if border type is rectangle.
Lower Right Longitude: Set Lower Right Longitude if border type is rectangle.
5.4 DATE / TIME
When in the Root menu, click the Configuration icon, then the Date/Time icon. The menu screen below will appear.
This menu is for setting up the date/time parameters for the DVR.
Date/Time – Date/Time Settings
5.4.1
Date/Time Settings
Time Zone: Set the time zone that the DVR adjusts to when updating from the time server.
Date: Set current Date.
Time: Set current Time.
Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Time Format: Change time format between 12H and 24H mode.
Time Synchronization: Select "Off", "NTP" or "GPS" for time synchronization.
If selecting "NTP", you will be able to do the following NTP settings:
Update Interval: The frequency that the system automatically updates the time via the NTP server. Select Daily,
Weekly, or Monthly.
NTP Server: Displays the time server address that the DVR uses for time synchronization. Requires operating
network configuration and WAN or LAN access to a compatible NTP server.
To find a compatible NTP address, please follow these steps:
a) Go to a PC that is connected to the internet.
39
Advertisement
Table of Contents
