Using Feature Codes - 3Com NBX Manual

Using Feature
Codes
Table 6 NBX Feature Codes (Alphabetical by Feature or Task)
Feature
Account Codes
ACD, Hunt, and Calling
Groups
Automatic Callback
Call Forward All
Call Forward Busy
Call Forward No Answer
Call Park — Park a Call
Call Pickup — Directed
These features are "persistent," that is, each one remains active until
you turn it off, as described in
If you forget which of the persistent features you have activated on
your telephone, log in to the NBX NetSet utility and go to My Calling
Privileges > Feature Settings. See
Chapter 1 for information on how to log in to the NBX NetSet
Exception: If you have activated one or more persistent features and your
mailbox has messages, you hear the New Messages Dial Tone whenever
you remove the handset from the charging unit, until you have deleted all
messages.
Follow these steps to use NBX feature codes:
1 Remove the handset from the charging unit.
2 Press Feature + the feature code and any additional values as specified in
Table 6.
3 Hang up when your call is complete or you have activated the features
that you want.
Feature Code
F + 888 + account code +
number
F + feature code for the group + group
password + #
F + 469 + hang up
F + 465
F + 467
F + 466
F + 444 + one of the Call Park extensions
for your NBX system
F + 455 + the extension of the ringing
telephone
Table 6.
"The NBX NetSet Utility"
See
+ telephone "Account (Billing) Codes"
#
"Automatic Call Distribution Groups,
Hunt Groups, and Calling Groups"
Chapter 7
"Using Automatic Callback"
Chapter 4
"Forwarding Incoming Calls"
Chapter 4
"Forwarding Incoming Calls"
Chapter 4
"Forwarding Incoming Calls"
Chapter 4
"Call Park"in
"Call Pickup"

Using Feature Codes

in
™ utility.
in Chapter 7
in
in
in
in
in
Chapter 7
in Chapter 7
91