Disconnecting The Last Person That You Called - 3Com NBX Manual

Disconnecting the
Last Person
That You Called
3 Dial a call to an internal or external third party.
For an announced conference, wait for the third party to answer the
■
call, and then press Feature + 430 again.
Until you press Feature + 430 the second time, the second party
remains on hold, and you may converse with the third party privately.
For a blind conference, press Feature + 430 immediately after you
■
dial the number. You return to the conference, and you and the
second party hear the third party's telephone ringing.
If the third party answers, three parties are now in the conference call.
If the third party is internal and does not answer, the attempt to
conference that party is cancelled. You cannot establish a conference call
with an NBX user's voice mailbox.
4 Repeat steps 2 and 3 to conference in a fourth party.
For details about the Mute features, see
Controls" in Chapter
Use the Conference Drop feature to disconnect the last person that you
add to a conference call. This feature is helpful if, when you add a party,
your call is answered by someone else.
Only the person who added the last caller to the conference call can
■
drop that caller.
Your administrator can configure any Access button on the Attendant
■
Console associated with your Cordless telephone to be a Conference
Drop button.
On a 3Com Cordless Telephone, or a telephone that does not have a
button programmed for Conference Drop:
1 While on the conference call, press Feature + 431.
2 The system returns you to the others who are in the conference call.
Establishing a Conference Call Using Feature Codes
"Telephone Buttons and
2.
61