Blind Transfer; Direct Mail Transfer; Establishing A Conference Call Using Feature Codes - 3Com NBX Manual

60 C 4: S
HAPTER TANDARD

Blind Transfer

Direct Mail Transfer

Establishing a
Conference Call
Using Feature
Codes
F
EATURES
In a blind transfer, you transfer the call without notifying the recipient:
1 While on a call, press the Xfer button. The system places the call on hold
and selects a new line.
2 Dial the number to which you want to transfer the call.
3 As soon as you hear a full ring, press the Xfer button and hang up.
If you press the Xfer button too soon after you dial the number, the
transfer might not occur.)
You can transfer a call directly into another user's voice mailbox. The call
does not ring on that user's telephone.
Calls transferred to a user's mailbox by means of Direct Mail Transfer are
always directed into that user's voice mailbox, even if the recipient has
specified a different call coverage point.
On a 3Com Cordless Telephone:
1 While you are on a call, press Feature + 441.
2 Dial the voice mail extension to which you want to transfer the call.
3 Hang up the handset.
You can establish a Conference Call with up to four parties, including
yourself, depending on your NBX system configuration. You must be
using a telephone on the NBX system to establish the call. The other
parties can be any combination of internal and external parties.
If the NBX has SIP (Session Initiation Protocol) enabled, you are limited to
three-party Conference calls, including yourself, unless your NBX system
is configured with a 3Com SIP Conference Server. For more information
on making Conference calls with SIP enabled, see your NBX administrator.
From a 3Com Cordless Telephone, follow these steps:
1 Dial a call, or receive a call from someone else. Two parties are now on
the call.
2 While on the call, press Feature + 430. The system selects a new line and
places the first party on hold.