Using Automatic Callback; Initiating Automatic Callback; More About Automatic Callback - 3Com NBX Manual

66 C 4: S
HAPTER TANDARD
Using Automatic
Callback
Initiating Automatic
Callback
More About
Automatic Callback
F
EATURES
Automatic Callback allows you to request a call back ring from a
destination extension that is in use or unanswered. The NBX system
attempts to connect you when the called party at that extension becomes
available.
On an NBX telephone, the Automatic Callback feature is helpful when:
The person you are calling is on another call and you want the system
■
to generate a call back ring as soon as this person is available.
The person you are calling does not answer the call and you want the
■
system to generate a call back when this person is available.
You initiate an Automatic Callback through Feature code 469 or a
programmed system access button depending on the type of NBX
telephone you have and how it is configured.
You can initiate Automatic Callback while making a direct call to an
extension that is in use or unanswered.
1 While on a call to an extension that is in use or unanswered, press
Feature + 469 (or press the Automatic Callback Access button if one is
programmed on your telephone).
2 Disconnect from the call.
If the Automatic Callback attempt is successful, the message
■
"Callback Extension XXX" appears on your display panel.
If the Automatic Callback attempt is not permitted, the message "Not
■
Allowed" appears on your display panel. See
Callback" in this chapter.
3 When the party on the destination extension becomes available, you
receive a call back ring. When you answer this call back, the destination
extension rings and your call then can be connected.
If the party on the Automatic Callback destination extension does not
return your call within the time set by the Automatic Callback Return
Interval, the system cancels the Automatic Callback request. For more
information, see the
These usage tips and limitations apply to Automatic Callback:
An Automatic Callback Return Interval, set by the NBX NetSet
■
administrator, determines the maximum amount of time you can wait

"More About Automatic Callback"

"More About Automatic
section.