Putting A Call On Hold; Dialing Another Call; More Than One Call - 3Com NBX Manual

58 C 4: S
HAPTER TANDARD
Putting a Call
On Hold

Dialing Another Call

More Than One Call

F
EATURES
busy are forwarded to the Call Forward No Answer destination after
the specified number of rings. All other feature settings are ignored.
If Forward to Mail is enabled and Call Forward All, Do Not Disturb, Call
■
Forward No Answer, and Call Forward Busy are not enabled, all calls
received when this extension is not busy are forwarded to the Call
Forward Default destination after one ring.
If no call forwarding settings are enabled, all calls received this
■
extension is busy are immediately forwarded to the Call Forward
Default destination. If this extension is not busy, all calls are forwarded
to the Call Forward Default destination after the number of rings
specified in the Call Forward Default page of the NetSet utility.
To put a call on hold:
1 Press the Hold button.
2 To return to the call, press the appropriate System Appearance button.
To place a call on hold and dial a new call:
1 Press the Hold button.
2 Press the System Appearance button that is currently not being used.
Typically the first two System Appearance buttons on the left of a 3Com
Cordless Telephone are used for your extension. Your system
administrator can verify the number and location of System Appearance
buttons on your telephone.
3 When you hear dial tone, dial the second call.
The number of simultaneous calls that you can have on your 3Com
Telephone is limited by the number of System Appearance buttons that
are defined for your extension. The default is the first two System
Appearance buttons on the left of 3Com Cordless Telephones. Your
administrator can verify the number and location on your telephone.