Cancelling An Mwi Message; Dialing A Call To A Remote Office; Using Unique Extensions - 3Com NBX Manual

118 C 7: G
HAPTER ETTING
Cancelling an MWI
Message
Dialing a Call to a
Remote Office
Using Unique
Extensions
M Y T
ORE FROM OUR ELEPHONE
After you have sent an MWI message, you can cancel it and remove it
from the list on the target telephone. If it is the only unattended MWI
message on the target telephone, cancelling it turns off the MWI light.
You can cancel an MWI message only from the same extension from
which you sent the MWI message.
To cancel an MWI message:
1 Pick up the handset.
2 Press Feature + 413 or press the MWI Cancel button. The display panel
on your 3Com Telephone shows
plays.
3 Dial the extension to which you sent the MWI message that you want to
cancel and press .
4 The display panel on your 3Com Telephone shows
Confirmation Tone plays.
You can dial calls between sites in your organization that are separated
geographically but that are linked by a Wide Area Network (WAN)
connection. Each site must have an NBX system. Typical configurations
are described in the next sections.
In the sample network shown in
organization has a unique telephone extension. Whenever you make a
call to an extension that is not located at your own site, your NBX system
sets up a connection to the NBX system at the other extension's site.
In this example, to call a user in Dallas, a user in Chicago dials a Dallas
extension (3000 through 3999). The dial plan on the Chicago NBX system
sets up the necessary connection to the Dallas NBX system and then to
the extension at that site.
S
YSTEM
Cancel MWI To:
#
Figure
. The Feature Entry Tone
Cancel Sent
7, everyone in the entire
. The